BGonline.org Forums

61P-31P-21 XG 4 ply RO

Posted By: neilkaz
Date: Thursday, 22 April 2010, at 6:10 p.m.

In Response To: 61P-31P-21 XG 4 ply RO (Chuck Bower)

This is more than 2 jsd and RO's from others show 24/23 24/22 being better than 5 pt also so ...

Well maybe with GNU calibrating at about 611,000/sec on the new rig, I could do some GNU 2 ply RO's just to make sure and if they support slotting (GNU results tend to like slotting more than XG) extend this XG more.

Messages In This Thread

• 61P-31P-21 XG 4 ply RO
  neilkaz -- Thursday, 22 April 2010, at 11:57 a.m.
  • 61P-31P-21 XG 4 ply RO
    Max Urban -- Thursday, 22 April 2010, at 12:25 p.m.
    • 61P-31P-21 XG 4 ply RO
      neilkaz -- Thursday, 22 April 2010, at 2:10 p.m.
      • 61P-31P-21 XG 4 ply RO
        Max Urban -- Thursday, 22 April 2010, at 2:25 p.m.
        • 61P-31P-21 and 61P-61P-21, comparing P to $
          Nack Ballard -- Friday, 23 April 2010, at 3:40 a.m.
          • Slight correction
            Nack Ballard -- Friday, 23 April 2010, at 4:15 a.m.
  • 61P-31P-21 XG 4 ply RO
    David Rockwell -- Thursday, 22 April 2010, at 3:00 p.m.
    • 61P-31P-21 XG 4 ply RO
      Timothy Chow -- Thursday, 22 April 2010, at 3:08 p.m.
    • 61P-31P-21 XG 4 ply RO
      neilkaz -- Thursday, 22 April 2010, at 3:09 p.m.
  • 61P-31P-21 XG 4 ply RO
    Chuck Bower -- Thursday, 22 April 2010, at 5:23 p.m.
    • 61P-31P-21 XG 4 ply RO
      neilkaz -- Thursday, 22 April 2010, at 6:10 p.m.
      • 61P-31P-21 XG 4 ply RO
        Chuck Bower -- Thursday, 22 April 2010, at 6:59 p.m.
        • 61P-31P-21 XG 4 ply RO
          neilkaz -- Thursday, 22 April 2010, at 7:07 p.m.
      • 61P-31P-21 XG 4 ply RO
        Daniel Murphy -- Thursday, 22 April 2010, at 7:45 p.m.
    • Will have an extension to post tonight
      neilkaz -- Friday, 23 April 2010, at 12:33 p.m.
      • Did you say tonight ? :)
        Nack Ballard -- Sunday, 25 April 2010, at 8:22 p.m.