BGonline.org Forums

OLM Mo 09/26/11

Posted By: Daniel Murphy
Date: Wednesday, 28 September 2011, at 1:36 a.m.

In Response To: OLM Mo 09/26/11 (Bob Koca)

http://www.bkgm.com/gloss/lookup.cgi?dilly+builder

and by extension, fully realizing that in the OLM position all spares are bearing on the same points, I meant that the lowest point of a prime tends not to be the best place to put a spare.

Messages In This Thread

• OLM Mo 09/26/11
  Jason Lee -- Tuesday, 27 September 2011, at 1:32 a.m.
  • OLM Mo 09/26/11
    neilkaz -- Tuesday, 27 September 2011, at 2:48 a.m.
  • OLM Mo 09/26/11
    David Rennie -- Tuesday, 27 September 2011, at 3:06 a.m.
  • OLM Mo 09/26/11
    Bob Koca -- Tuesday, 27 September 2011, at 3:25 a.m.
    • OLM Mo 09/26/11
      Stick -- Tuesday, 27 September 2011, at 3:49 a.m.
      • OLM Mo 09/26/11
        neilkaz -- Tuesday, 27 September 2011, at 6:06 p.m.
        • OLM Mo 09/26/11
          Stick -- Tuesday, 27 September 2011, at 6:24 p.m.
      • OLM Mo 09/26/11
        Bob Koca -- Wednesday, 28 September 2011, at 1:13 a.m.
  • OLM Mo 09/26/11
    Casper van der Tak -- Tuesday, 27 September 2011, at 6:07 a.m.
  • OLM Mo 09/26/11
    Taper_Mike -- Tuesday, 27 September 2011, at 6:35 a.m.
  • OLM Mo 09/26/11
    higonefive -- Tuesday, 27 September 2011, at 7:01 a.m.
  • OLM Mo 09/26/11
    Havard Raddum -- Tuesday, 27 September 2011, at 10:45 a.m.
  • OLM Mo 09/26/11
    Timothy Chow -- Tuesday, 27 September 2011, at 5:16 p.m.
  • OLM Mo 09/26/11
    Daniel Murphy -- Tuesday, 27 September 2011, at 5:42 p.m.
    • OLM Mo 09/26/11
      Bob Koca -- Wednesday, 28 September 2011, at 1:11 a.m.
      • OLM Mo 09/26/11
        Daniel Murphy -- Wednesday, 28 September 2011, at 1:36 a.m.
  • OLM Mo 09/26/11
    Chuck Bower -- Wednesday, 28 September 2011, at 2:12 a.m.
  • OLM Mo 09/26/11 ROLLOUT
    Jason Lee -- Friday, 30 September 2011, at 1:38 a.m.