[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

BGonline.org Forums

GTII turned upside down....

Posted By: Bill Riles
Date: Monday, 23 March 2009, at 4:53 p.m.

In Response To: GTII turned upside down.... (Chuck Bower)

Gregg Cattanach and I experimented with this and determined it could be done. I was also afraid it might put a 'bind' on the board/hinges when done but we found the board closed tightly/snugly and that the clock would actually move within the board -- indicating a 'loose' fit. If we closed the board with the clock near the handle edge the clock would slide within the board toward the hinge side when the board was lifted by the handle. Again, I would always exercise caution when putting it in the board and closing the board to make sure the board closes easily without binding.

Messages In This Thread

 

Post Response
Your Name:
Your E-Mail Address:
Subject:
Message:

If necessary, enter your password below:

Password:
 

 

[ View Thread ] [ Post Response ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

BGonline.org Forums is maintained by Stick with WebBBS 5.12.